Witter SK28U Notice De Montage

MATERIALS
.
A 1 Main Crossbar
C 2 Sidearms
D 2 M12x35x1.75 Bolts, Flat Washers, Lock Washers, Cage Nut Retainers & Square Nuts
E 2 M12x45x1.75 Bolts, Flat Washers, Lock Washers & Nuts
F 2 M12x35x1.75 Bolts & Nuts
ZE 2 Electrical Plate
ZF 2 Fixed Neck
ZQ 2 Neck kit
FITTING
1. To remove bumper, undo 3 off fixings inside each wheel arch. (Note it may be necessary to remove inner wheel arch
lining on near side to access mounting holes in the chassis).
2. Remove 3 fixing screws from underside of bumper.
3. Remove plastic cover of light clusters to reveal fixings.
4. Remove light clusters.
5. Remove bumper starting with tips either side
6. Remove crash beam. (return to customer).
7. Insert sidearms with assembled cage nut, then loosely attach with fixings (D).
8. Assemble crossbar using fixings (E&F).
9. Attach neck option.
10. Cut bumper as per drawing, then replace bumper.
Recommended torque settings: Grade 8.8 bolts: M8 - 24Nm, M10 - 52 Nm, M12 - 80 Nm, M14 - 130 Nm, M16 - 200
Nm Grade 10.9: M12 – 120Nm, M10 – 70Nm M8- 35Nm
Fitting
Instructions
W 0 0 0 1 S K 2 8 U -F IT $ 0 1 1 4 0 5 0 7 0 0 0 0
For Skoda Rapid Spaceback 2014-
#NAME?
TOWBAR SK28U