Oceanic FD-40MD Guide D'utilisation page 19

Using Your Stand Fan
Fan tilt adjustment
1. Loose the screws at both sides of the motor unit bracket.
2. Adjust the fan tilt as you desire.
3. Tight the screws to hold the motor in position.
Oscillating control
The fan can operate in oscillating or stationary mode. Press
the oscillation button to activate the oscillating mode.
Height adjustment
The height of the fan can be adjusted.
Loose the knob (part 8) to move the stand up or down as
required. Tighten the screw at the desired position.
Caution: the fan body is heavy, please do it in carefully.