LSL 506H141A Instructions De Montage page 2

Important:
Read this instruction manual carefully and mind all warnings and tips. You should do this work
only if you'requalified; otherwise we recommend this mounting to be done by a qualified
workshop. Improperly mounting of this kit can reduce the driveability of the motorcycle and may
be a risk to your health and life.
Fitting:
Demount original Fender and fit the new one as shown.This is identical to the three other
mounting points.
M6x22
————————————————
Rev. 00 09/10/2013
Article-No. : 506H141A
Product : Fender, front
Vehicle-Manufacturer : Honda
Model : CB 1100A
M6x16
spacer, l=6mm
Accessories from
Fitting Instruction

2013
spacer, l=4mm
nut M6,
self-locking
Collar nut M6, use
thread locking
adhesive
—
The Original
——
Page 2 of 3