Uline H-3069 Mode D'emploi page 3

• Always disconnect the tool from the air supply,
empty the magazine and read the safety warnings
before starting maintenance.
• Check that all safety devices function properly,
especially that the trigger moves freely and that all
screws and nuts are securely tightened.
• This tool does not require special servicing. It
only needs regular cleaning with a non-corrosive
cleaning agent. Do not remove any parts for
cleaning purposes.
MFG. PART NO.
JK20T777L
• Air pressure:
- Approx. 5-6 bar working pressure
- 7 bar maximum air pressure
• The stapler is designed for use with original Josef
Kihlberg staples only
PAGE 3 OF 9
MAINTENANCE
SPECIFICATIONS
HEIGHT LENGTH
250mm 375mm
• A small amount of lubricating oil is needed in the
nipple each day or 10 drops once a week to ensure
safe functioning.
• At high frequency stapling lubricating oil is
recommended.
• Contact Uline for more information: 1-800-295-5510.
WIDTH WEIGHT
68mm 2.1kg
• Magazine loading: Loaded from above
• Firing of the stapler: Single shot firing
• Air consumption per shot: 0.3 l at 6 bar operating
pressure
1-800-295-5510
uline.com
STAPLES LENGTH
777 8–16mm
MAGAZINE
CAPACITY
100
0421 IH-3069