Before Using; Safety Instructions - Urbanbiker DAKOTA FE Mode D'emploi

BEFORE USING

The first time you use your bicycle, Urbanbiker recommends cycling in a clo-
sed area for 1 or 2 hours, depending on the user expertise in handling bicy-
cles. Follow the battery safety instructions in this manual, do not exceed the
recommended maximum weight for this model and ride the ebike always at
the recommended speed on each route.

SAFETY INSTRUCTIONS

Verify that the brakes work properly. Also, check the tire pressure. Make sure
all levers on your bicycle are properly locked. This bicycle is not designed for
use on stunts, jumps, steep ascents or descents on unpaved roads.
BATTERY
URBANBIKER recommends to follow the instructions below:
• Use only the battery and charger recommended by URBANBIKER.
• Do not expose the battery or charger to heat (> 50° C).
• Do not disassemble or modify the battery or charger, do not expose the
battery or charger to liquids.
• Do not use a damaged battery or charger.
• Do not continue charging the battery if the charging process exceeds the
specified charging time.
• Do not use the battery charger if it emits a strange smell, gets unusually
hot or if something looks untypical.
• Do not touch the battery or charger with wet hands.
• Never use the battery or charger with damaged cables, or if the battery
or charger is malfunctioning, always return the charger and battery to the
dealer for servicing, inspection, repair or adjustment.
• Charger current must be 220-240V AC, do not apply a voltage to the char-
ger outside the above ranges.
• Do not place the battery or charger near an electric heater, gas or mi-
crowave appliance.
• The battery is equipped with a sleep mode. Press and hold the power
button for 10 seconds to activate/deactivate sleep mode.
• Two unique keys are included with the battery.
• Make sure you always have at least one spare key.
EN