T3 LUCEA ID Série Guide De L'utilisateur page 8

OPERATING
14
INSTRUCTIONS
TROUBLESHOOTING
1
If you experience
accidental activation
• Keep your hand away from the
Power Button to avoid unintended
interface activation during styling.
2
If interface is not responsive
• Ensure you are only touching a
single area of the interface at a time.
If contact is made with more than
one area at the same time, the tool
may not respond.
• Ensure the screen is unlocked. To
unlock screen, quickly double tap the
Power Button.
• If tool is still unresponsive, unplug,
wait 15 seconds, and plug in again.
3
If your tool won't turn on
• Ensure you are holding the Power
Button for a full 3 seconds.
• Avoid touching surface area
above Power Button while turning
on the tool.
• If tool still will not turn on, unplug,
wait 15 seconds, and plug in again.
4
If power button is not visible
• Ensure the tool is plugged in.
• If tool is plugged in, unplug, wait 15
seconds, and plug in again.
If you continue to experience issues after
trouble shooting your Lucea ID, please contact
customer service at T3Micro.com/contact-us.
LUCEA ID
OPERATING
INSTRUCTIONS
LUCEA ID
Use iron with caution, and select
settings with caution. There are
individual variations in how hair
responds to heat. The optimal
selection of settings may vary from
person to person. In the first use, it
is best to test at a low heat and for
a short duration. If there are any
adverse or unexpected effects, stop
use of the iron immediately.
15