Eng - AENO EK2 Mode D'emploi

ENG

The AENO electric kettle is designed for boiling water at home and in
the office.
Model: AEK0002/AEK0004 (Plug Type E/F), AEK0002-UK/AEK0004-UK (Plug
Type G).
Technical Specifications
Supply voltage: 220–240 V; Frequency: 50–60 Hz. Power: 1850.0–2200.0 W. Net
Weight: 1.05 kg. Dimensions (L×W×H): 230.5×160×251 mm. Scope: 1,5 L. Power
cable length: 0.75 m. Boiling water time: ≤6 min. Automatic shutdown.
Package Contents
AENO kettle (see picture a), stand, quick guide, warranty card.
Limitations and Warnings
Use the unit only indoors at room temperature and no higher than 2000 m
above sea level. Connect only to a grounded power outlet. Connect and
operate the unit only in accordance with its specifications. Do not disassemble
or repair the unit yourself. Children and persons with disabilities may use the
device only under the supervision of adults and persons experienced in the use
of the device. Do not allow children to play with the device. Make sure that the
liquid does not come in contact with the stand ❸ and the power button ❼
(see Figure a). Do not immerse the device body ❷ , the device stand ❸ and the
power cord ❽ (see figure b) in water. Use the device only with the supplied
stand. Do not plug the unit into an outlet if you notice damage to the cabinet,
stand or power cord. If the device malfunctions, unplug it immediately. Install
the device stand on a sturdy and stable surface, away from hot surfaces,
bathtubs, showers, swimming pools and other potentially dangerous places.
During use, the body of the device heats up to a high temperature. Do not
touch the housing with your hands, lift the device from the stand only by the
handle ❻ . Do not open the lid of the device ❹ during boiling water and during
the first 5 minutes after boiling. When pouring water from the device
5 aeno.com/documents