Bulb Replacement; Securing The Oven To The Cabinet - EAS ELECTRIC HORNO EMV65VX Guide D'utilisation

SHELF PLACEMENT WARNING:
To ensure the oven shelves operate safely, correct placement of the shelves
between the side rail is imperative. Shelves and the pan only can be used
between the first and fifth layers. The shelves should be used with the right
direction, it will ensure that during careful removal of the shelf or tray, hot food
items should not slide out.

BULB REPLACEMENT

The oven light bulb is a special bulb that is resistant to high temperatures. To
replace it, proceed as follows:
Disconnect power from the mains outlet or

switch off the circuit breaker of the unit's mains
outlet.
Unscrew the glass lamp cover by turning it

counter-clockwise (note, it may be stiff) and
replace the bulb with a new one of the same
type.
 Screw the glass lamp cover back in place.
Note: Only use 25W/230V, T300°C halogen lamps.

SECURING THE OVEN TO THE CABINET

1. Fit oven into the cabinet recess.
2. Open the oven door and determine the
location of the mounting screw holes.
3. Fix the oven to the cabinet with two screws.
OR
8
V.3