Electricity Supply - Filex HS Manuel D'utilisation

5
Opening the safe with the user combination
Step Action
Enter the user combination with which you have locked the safe,
1
for example, 123456
The safe is now open.
If you do not want the combination to appear in the display when opening the safe, follow the procedure
below.
Step Action
1 Press 0
2 Press LOCK
Enter the user combination with which you have locked the safe,
3
for example, 123456
The safe is now open.
6
Emergency key function
Remove the plastic cap from the right-hand side of the keyboard to reveal the keyhole. You can now open
the safe with the emergency key.
7

Electricity supply

You can check whether the batteries are still good by pressing LOCK once.
In the display:
bA-HI appears if the batteries are in order
■
bA-LO" appears if the batteries are low. This means that they have to be changed.
■
Do not use rechargeable batteries. Only use high quality, AA/LR6 alkaline batteries (4x).
Click the battery cover open on the inside of the door. Take the batteries out, put new ones in and put the
cover back into place. Test locking and unlocking the safe a few times with the door open.
Enter
123456 OPEN
Enter
0
LOCK
123456 OPEN
ERROR
6x beep
sound
ERROR
6x beep
sound
7