for Living 088-1383-4 Instructions D'assemblage page 5

Fig. 3-1: Screw Centre Hook (F3) into Centre fitting (A3) and secure them properly.
Fig. 3-2: Connect Top Roof Bar (B3) with Centre fitting (A3).
Attention: the end of Label "→B3" affixed on Centre Fitting (A3) is used to Assemble B3.
Fig. 3-3 & 3-4: A ladder is needed for this step—when placing Centre fitting (A3), please make sure
That, the middle connecting end of A3 labeled with "→D3" should be directed to Long Beam (B2);
While the part labeled with the logo"→D4" be directed to Short Beam 1 (A2). Connect one end of
Corner Arch bar ( C3&C4 ) and Slanting Bar (B3), and fix the other end of C3 & C4 with Screen (A).
Fig. 3-5 & 3-6: Connect one end of Arch Bar 4 (Long) (D4) and Centre Fitting (A3), and secure the
other end of D4 to the Short Beam 1 (A2) with Screw (BB) and Washer (CC).
Fig. 3-7: Do the same for Arch bar (D3) and Centre Fitting (A3), then fix them with Long Beam (B2) by
using BB and CC, to complete top frame assembly.
5 of 9