TempMinder MRI-015KH Manuel D'instructions

TempMinder® MRI-015KH – Instruction Manual
Thank you for the purchase of your new TempMinder® Indoor Comfort Station. Please use the instructions below to setup this device.
Initial Setup
1. Insert the stand into the bottom of the monitor.
2. Insert two "AAA" batteries into the rear battery compartment of
the monitor. Once inserted, the monitor will immediately turn on.
3. On the rear of the monitor, move the sound sensor to the OFF or
ON position. While on the ON position, the backlight will
automatically turn on when the monitor senses sound. If you have
chosen to leave the sensor OFF, use the LIGHT button on the
back of the monitor to turn the backlight on for 8 seconds.
4. Use the °C/°F button on the front of the monitor to toggle
between Celsius (°C) and Fahrenheit (°F).
5. (Optional) Plug the AC Adapter into the DC 5V input on the rear of
the monitor and into a 120V outlet. AC Adapters may be
purchased from www.MinderResearch.com.
Setting Time
The TempMinder® Indoor Comfort Station comes preprogrammed in 24
hour or Military Time. To toggle between 24 or 12 hour time, press and hold
the 12/24 button for 5 seconds. Please note, you must have the time
displayed on the monitor to toggle between time modes.
1. While the time is displayed, press and hold MODE for 5 seconds
until you see the Hour flashing.
2. Use the ▲ button to move the Hour up; use the ▼ button to
move the Hour down.
3. Press and release the MODE button and you will see the minutes
flashing.
4. Use the ▲ button to move the Minutes up; use the ▼ button to
move the Minutes down.
5. Press and release the MODE button and neither the Hour or
Minutes will be flashing and the time will be set.
Setting the Date
1. Press and release the MODE button until you see a date displayed
on the monitor. By default, the date on the monitor will display
1/1.
2. Once the date is displayed, press and hold the MODE button for 5
seconds until you see the Year blinking. By default, the year is set
to 2011.
3. Use the ▲ button to move the Year up; use the ▼ button to move
the Year down.
4. Press and release the MODE button and you will see the Month
flashing.
5. Use the ▲ button to move the Month up; use the ▼ button to
move the Month down.
6. Press and release the MODE button and you will see the Day
flashing.
7. Use the ▲ button to move the Hour up; use the ▼ button to
move the Hour down.
8. Press and release the MODE button and the Date will be set.
Setting the Alarm
1. Press and release the MODE button until you see the
the top left of the time section.
2. While the time is displayed, press and hold MODE for 5 seconds
until you see the Hour flashing.
3. Use the ▲ button to move the Hour up; use the ▼ button to
move the Hour down.
4. Press and release the MODE button and you will see the minutes
flashing.
5. Use the ▲ button to move the Minutes up; use the ▼ button to
move the Minutes down.
6. Press and release the MODE button and neither the Hour or
Minutes will be flashing and the alarm will be set.
All manuals and user guides at all-guides.com
icon on
Turn the Alarm On/Off
Press and release the ▲ button to toggle the alarm off and on. The
will display when the alarm is on.
Snooze
Press and release the SNZ button on the front of the monitor or the SNOOZE
button on the rear of the monitor to initiate the 8-minute snooze.
Display MAX/MIN Temperature and Humidity
1. Press and release the MAX/MIN button to display the maximum
temperature and humidity. Note the MAX next to the humidity.
2. Press and release the MAX/MIN button to display the minimum
temperature and humidity. Note the MIN next to the humidity.
3. Press and release the MAX/MIN button to display the current
temperature and humidity. Note that neither MAX nor MIN are
displayed next to the humidity.
Specifications
Batteries Required
Temperature Range
Humidity Range
Update Interval
Battery Life
Temperature Accuracy
Warranty
Forecast Humidity Key
Temperature Sunny
Less than
Less than 15°C
or equal
(59°F)
to 40%
Less than
15°C-24.9°C (59°F
or equal
– 76.82°F)
to 55%
Less than
Greater than
or equal
25°C (77°F)
to 60%
Comfort Key
No Icon Dry
20°C – 25°C (68°F –
Humidity less
77°F) @ 40% – 69%
than 40%
Humidity
Warranty: This product is guaranteed against manufacturing defects (not
including batteries) for a period of one year. Should it fail, return it to the
address below with a copy of your receipt.
TempMinder®
3000 SE Waaler Street
Stuart, FL 34997 USA
+1 (772) 463-6522
info@MinderResearch.com
www.MinderResearch.com
(772) 463-6522
©2017 Minder Research Incorporated
2 "AAA" Batteries (Not Included)
-10°C – 61°C (14.2°F – 140°F)
20% - 99%
60 seconds
9 to 14 months with Alkaline
Battery; 2 to 3 years with Lithium
Battery
+/- 1°C/2°F
1 Year Limited Warranty
Half-
Cloudy Rainy
Sunny
Between Between Equal or
41% and 66% and greater
65% 71% than 72%
Between Between Equal or
56% and 71% and greater
70% 79% than 80%
Between Between Equal or
71% and 76% and greater
79% 86% than 87%
Comfort Wet
20°C – 25°C
Humidity
(68°F – 77°F)
greater or
@ 40% –
equal to 70%
69% Humidity
icon