Cleaning And Maintenance - Livoo TEA302 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Input: 5.0 V
2.0 A , 9.0 V
Output: 5W / 7.5W / 10W
(with micro USB cable - type C: 5 W)
Charge efficiency: 75% to 80%.
Standby power consumption: <30mA
Use of the device
This wireless charger is a smart product with a simple design and is compatible with all mobile phones
with QI technology. The mobile phone can be charged inductively without the need to plug in.
1. There are two charging cables available to suit your needs: Micro USB-USB & Micro USB-Type C.
- Insert the micro USB cable end into the charger.
- Insert the USB end or Type C end into a compatible charging port on your computer or into an
adapter (not supplied).
2. Place your QI certified mobile phone on the wireless charge. The LED indicator lights up and blinks.
your phone is charging.
3. If the LED indicator goes out, your phone is charged, the charger goes into standby.
Note: If the wireless charger is overheating, move your mobile phone away from the device. Allow it to
cool before attempting to charge the mobile phone.

Cleaning and maintenance

Wipe your cable with a dry cloth.
If not use, store in a dry place away from dust.
EU DECLARATION OF CONFORMITY
We
DELTA
BP61071
67452 Mundolsheim – France
Declare under our own responsibility that the article :
Description : Wireless charger fast charge
-
Reference : TEA302
-
to which this declaration applies, is in conformity with the applicable EU harmonization legislation
DIRECTIVES
ROHS 2011/65/EU
RED 2014/53/EU
Mundolsheim le 15/12/2022
David Bousquet, CEO
2.0 A
The object of the declaration described above is in conformity with
Directive 2011/65/EU of the European Parliament and of the Council of 8
June 2011 on the restriction of the use of certain hazardous substances
in electrical and electronic equipment.
EU 2011/65/EU et EU 2015/863
EN IEC 62368-1 2014+A11 2020
ETSI EN 301 489-1 V2.2.3 + ETSI EN 301 489-3 V2.1.1 + ETSI EN 303 417
V1.1.1 + EN IEC 62311 2020
EN 55035 2017/A11 2020 + EN 55032 2015/A11 2020 + EN IEC 61000-
3-2 2019/A1 2021 + EN 61000-3-3 2013/A2 2021
www.livoo.fr
NORMES or SPECIFICATIONS

Publicité

Table des Matières
loading

Table des Matières