Product Description - Concept VS5120 Mode D'emploi

Ventilateur colonne
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
EN

PRODUCT DESCRIPTION

1. Control panel
2. Display panel
3. Appliance body
4. Humidifier base
Note: All pictures used in this manual are for illustration
only. In case of any differences between the images used
and the actual product, it is necessary to follow the actual
product.
INSTLLATION INSTRUCTIONS
1. Remove the fan body and individual parts from the packaging. Connect the front and rear support base (see Fig. 1).
2. Remove the screws from the fan body (see Fig. 2).
3. Attach the fan body to the support base with screws (see Fig. 3).
Fig. 2
36
Fig. 1
Fig. 3
OPERATION GUIDELINES
REMOTE CONTROL (Fig. 4)
Description of buttons
1.
ON/OFF button
Use the ON button to turn on the appliance. The fan will start in a breeze mode.
To switch off the appliance, press the OFF button.
2.
SPEED SETTING BUTTON
Once the fan has started, press this button repeatedly and the fan will switch the
circulation mode in the order of 1-2-3-4-5-6.
3.
MODE BUTTON
Press this button to select the desired mode. When pressing the button repeatedly or pressing for some time the mode
will change in the following order: normal (power can be freely changed between 1-6), natural (power automatically
changes between 1-3), sleep (fan power starts at point 2 and decreases to 1 over time). The light indicator indicated
the status of the mode.
4.
ROTATION BUTTON
Once the fan starts, press this button to set the rotation mode. TThe indicator on the display indicates the active
oscillation mode.
5.
TIMER BUTTON:
Press the timer button and then use the "+" "-" buttons to set the desired ventilation time from 0.5 to 12 h (from 0.5 h to
10 h at intervals of 0.5 h, from 10 to 12 hours at intervals of 1 h).
Using the remote control
Point the remote control on the receiver on the fan body and press the desired button. The remote control operates at
a distance of up to 5 metres at an angle of +/- 30°.
Before discharging the remote control, remove the batteries and safely dispose of them.
Buttons in the appliance body / control panel (Fig. 5)
The buttons such as ON/OFF, SPEED, MODE, TIMER, ROTATION on the
appliance body perform the function as the corresponding buttons on the
remote control.
VS5120
VS5120
EN
Fig. 4
Fig. 5
37

Publicité

Table des Matières
loading

Table des Matières