Getting To Know Your Vinci Hands Free Citrus Juicer; Assembling Your Juicer - VINCI Hands Free Citrus Juicer Instructions

GETTING TO KNOW YOUR HANDS FREE CITRUS JUICER
Before first use, please remove all packaging and any labels or stickers from your Vinci Hands
Free Citrus Juicer. Be sure that all parts listed below of your new Hands Free Citrus Juicer have
been included before discarding any packing materials.
Before using your Hands Free Citrus Juicer for the first time, please familiarize yourself with the
various parts of the machine and how it functions. Carefully read all the instructions.
A
B
C
D
K
E
MAX
F
G
H
9
A. Lid
B. Latch
I
C. Holding Cone
D. Reamer
E. Juice Bowl
F. Locking Juice Spout
G. Auto Juice Button
H. Reset Button
J I. Hinge
J. Fine Pulp Filter
K. Coarse Pulp Filter
L. Hinge Release
M. Drive Coupler
N. Motor Unit
O. Power Switch
L
Q. Instruction Manual
M
Q
N
O

ASSEMBLING YOUR JUICER

Before first use, wash your Juice Bowl, Reamer, Filter, and Lid with warm soapy water.
1. Place Juice Bowl (E) on to Motor Unit, lining up
the Drive Coupler (M) on the Motor Unit with the
hole in the Juice Bowl.
3. Turn Juice Bowl to your left until it locks into
place and the Juice Bowl lines up with the lock
graphic on the Motor Unit.
5. Place Reamer (D) onto Drive Coupler and Pulp
Filter.
2. Looking straight at the unit, the Locking Juice
Spout (F) should be placed just to the right of the
Vinci logo.
4. Position desired Pulp Filter (J or K) onto Drive
Coupler.
6. Insert Lid (A) on to the Juice Bowl by sliding the
Hinge Release (L) button down, aligning the tabs
on the Hinge (I) with the holes in Hinge Release,
and sliding the Lid into place. Close Lid.
10