Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
ENGLISH
15. The blades are sharp. Handle them carefully.
16. Do not leave the appliance unattended while in use. Unplug it from the mains supply when
you finish using it or when you leave the room.
17. Do not plug the appliance into the power supply until it is fully assembled. Unplug the
blender before disassembling it or handling the blades.
18. Do not remove the main body until the blades stop completely.
19. Do not operate the appliance for more than 15 seconds and let it rest for at least 1 minute
to cool down the motor.
20. Do not use the appliance when empty.
21. Do not use the appliance when full of liquid.
22. Do not try to repair the appliance by yourself. Contac the official Technical Support Service
of Cecotec for advice.
23. Cleaning and maintenance must be carried out according to this instruction manual to
make sure the appliance functions properly. Turn off and unplug the appliance before moving
and cleaning it.
24. Store the appliance and its instruction manual in a safe and dry place when not in use.
25. No liability is accepted for any eventual damage or personal injuries derived from misuse
or non-compliance with this instruction manual.

2. BEFORE USE

1. After removing the packaging, make sure all parts and accessories are present and unda-
maged. Do not use the appliance if it is visibly damaged. In that case, contact with the official
Technical Support Service of Cecotec.
2. Wash all non-electrical components with warm soapy water. You can wipe the main body
of the appliance with a clean cloth.
3. Make sure that the mains voltage matches the voltage stated on the rating label of the
appliance.
3. OPERATION
1. Put the blades onto the axis on the bottom of the glass bowl.
NOTE: you can use the appliance with 2 or 4 blades. 2 blades are enough to process most
foodstuffs. Use 4 blades to process harder foodstuffs or even crush ice. Pull from the plastic
piece where the extra blades are attached to remove them from the blade assembly.
12
TITANGLASS 1000

Publicité

Table des Matières
loading

Table des Matières