Mectron starlight uno Mode D'emploi Et D'entretien page 20

starlight uno
Function
Interruption of
exposure cycle
Low battery
indication. The
remaining battery
charge is sufficient
for the execution of
6 cycles.
Battery discharged
indication.
Thermal protection
intervention
indication
Table 2 – Description of the acoustic and light signals of the handpiece.
Power LED Battery LED
ON OFF
ON Yellow ON
ON Green ON
ON OFF
12
Action/Button
on/off button
pressed for a short
time during the
exposure
on/off button
pressed for FASt
or SLOW RISE
polymerisation
Test LED
OFF
OFF
OFF
OFF
Acoustic signal
1 beep
2 beep on
completion of the
exposure cycle.
2 beep - No light
emission.
3 beep on
completion of the
FASt polymerisation
cycle or halfway
through the SLOW
RISE polymerisation
cycle and
interruption of the
cycle.
Position of the
handpiece in
the charging
unit
Not inserted
Inserted
Inserted
Not inserted
Light signal
Green and Yellow
LEDs flashing.
Green and Yellow
LEDs flashing.
Function
Charging unit
powered.
Battery being
recharged.
Recharging
completed.
Battery
charged.
No light
emission.