BE Ag & Industrial 35.200.002 Manuel D'utilisation page 2

IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE
Before using these jack stands, be sure to read all content within this manual, ensuring that you understand
the operating procedures, maintenance requirements and all safety warnings.
The owner and/or operator shall have an understanding of the product, its operating characteristics, and safety
operating instructions before operating this device. Safety information shall be emphasized and understood.
If the operator is not fluent in English, the product and safety instructions shall be read to and discussed with
the operator in the operator's native language by the purchaser/owner or his designee, making sure that the
operator comprehends their contents. These jack stands meet or exceed ASME/PASE 2014 standards.
ACTIONS TO HELP PREVENT DANGEROUS SITUATIONS
• Study, understand and follow all instructions before operating this device.
• Do not exceed the rated capacity stated.
• Use only on hard, level surfaces.
• Lift only on areas of the vehicle as specified by the vehicle manufacturer.
• No alterations shall be made to this product.
• Jack Stands are designed to support stated capacity. Stands should only be used to support
partial loads that consist of one end of a vehicle. Always use as a matched pair to support one
end of a vehicle only.
• Never use jack stands to support both ends or one side of a vehicle.
• Use only one (1) pair of stands per vehicle.
• Rated capacity is per pair only.
• Failure to heed these warnings may result in serious personal injury and/or property damage.
INSPECTION
• This device shall be inspected immediately if the device is believed to have been subjected to
an abnormal load or shock. It is recommended that this inspection be made by a manufacturer's
or supplier's authorized repair facility.
• Owners and/or operators should be aware that repair of this equipment may require specialized
knowledge and facilities. It is recommended that an annual inspection of the product be made
by a manufacturer's or supplier's authorized repair facility and that any defective parts, decals,
or safety labels or signs be replaced with manufacturer's or supplier's specified parts.
DAMAGED EQUIPMENT AND ADD-ONS
Any jack stand that appears to be damaged, is found to be worn or operates abnormally in any way will be
removed from service and destroyed immediately.
Alterations
Because of potential hazards associated with this type of equipment, no alterations shall be made to the
product.
Attachments and Adapters
Only attachments and/or adapters supplied by the manufacturer shall be used.
2
USER MANUAL