Signature Design by Ashley L000718 Instructions De Montage

THIS FIXTURE SHOULD TAKE APPROXIMATELY 10 MINUTES TO ASSEMBLY.
MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED.
TOOLS: You will need following tools or equipment:
ladder, screwdriver, adjustable wrench, wire cu ers and
pliers.
UNPACK THE FIXTURE: You should have received the
following parts in the package: canopy, chain, quick link,
pole assembly, column, shade, socket assembly, diffuser,
(2) metal washers and finial. To protect the finish, place
all parts on a so surface.
MOUNTING HARDWARE PACKAGE: Screw collar loop,
screw collar nut, nut, nipple, (2) 1-4 x 1-1/4" screw,
crossbar, green ground screw and (3) wire connectors.
FIXTURE ASSEMBLY:
1. Place the shade, column over the nipple on top of the
socket assembly and rotate the pole assembly to secure.
2. Determine the length of chain required to hang the fixture
at the desire height, remove or add chain as desired. using
pliers, open one end link of chain and a ach to screw collar
loop, a ach the quick link to end link of the chain and a ach
the quick link to chain loop and then secure with small nut.
thread fixture wire and ground wire UP through every other
link of chain.
TO SPREAD A LINK OF CHAIN
Use a pair of pliers and a screwdriver as shown above,
being careful to warp the jaws of the pliers with cloth to
protect the finish of the chain.
If the external flexible cable or cord of this luminaire is
damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified
person in order to avoid a hazard.
L000718
ASSEMBLY INSTRUCTION:
READ AND SAVE THE INSTRUCTIONS.
WARNING
Failure to read and carefully follow all instruc ons
could result in fire or serious bodily injury or death.
WARNING
To avoid in shock, fire or serious bodily injury or
death it is very important that the electricity servicing the fixture is turned
off before and during installa on.
CAREFULLY READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY. Because this fixture is
connected to live electrical wires, it is strongly recommended that you use a
qualified electrician.