DVI Lighting VANGUARD DVP1791 Instructions De Montage

VANGUARD
ASSEMBLY INSTRUCTIONS
DVP1791 DVP1794
DVP1792 DVP1795
DVP1793
Warning
All electrical connections must be made according to local
codes. If you feel you do not have the experience necessary to
do this, please have your fixture installed by a qualified,
licensed electrician.
The wattage of the LED arrays included is:
DVP1791 - 1 x 10.5W AC LED
DVP1792 - 2 x 10.5W AC LED
DVP1793 - 3 x 10.5W AC LED
DVP1794 - 4 x 10.5W AC LED
DVP1795 - 5 x 10.5W AC LED
Cleaning
We recommend that you use a mild detergent, such as dish
washing soap, and warm water to clean the glass and metal
surfaces. After cleaning, make sure to dry the fixture
completely because moisture will corrode the satin finish. Use
a damp soft cloth to wipe off dust. DO NOT use abrasive pads
or cleaning materials.
During installation, some fixtures may require subtle adjust-
ments in order for the fixture to look as intended.
Tools
Phillips head screwdriver
If you have and questions,comments, or concerns
contact us at customerservice@dvi.lighting
DVI Lighting
120 Great Gulf Drive, Concord
Ontario, L4K 5W1 Canada
T: 1 855 384 5483
F: 1 855 384 8435
1
3
3
A. Connect the copper ground wire to ground wire - If
you only have two wires coming from the electrical
box, connect the fixture's copper wire to the green
ground screw on the mounting plate.
B. Connect the white fixture wire to white supply wire.
C. Connect the black fixture wire to black supply wire.
2
These instructions are property of DVI Lighting. Do not copy or reproduce.
A
B
C