DVI Lighting DVP25101 Instructions De Montage

SECORD
AC LED
ASSEMBLY INSTRUCTIONS
DVP25101
DVP25143
DVP25144
Warning
All electrical connections must be made according to local
codes. If you feel you do not have the experience necessary
to do this, please have your fixture installed by a qualified,
licensed electrician.
Make sure to note the maximum recommended wattage for
your light fixture.
DO NOT EXCEED THE RECOMMENDED WATTAGE:
DVP25101 - 1 x 14.5W AC LED
DVP25143 - 1 x 30W AC LED
DVP25144 - 1 x 39.5W AC LED
Cleaning
We recommend that you use a mild detergent, such as dish
washing soap, and warm water to clean the glass and metal
surfaces. After cleaning, make sure to dry the fixture
completely because moisture will corrode the satin finish.
Use a damp soft cloth to wipe o dust. DO NOT use
abrasive pads or cleaning materials.
During installation, some fixtures may require subtle
adjustments in order for the fixture to look as intended.
Tools
Phillips head screwdriver
If you have and questions,comments, or concerns
contact us at customerservice@dvi.lighting
DVI Lighting
120 Great Gulf Drive, Concord
Ontario, L4K 5W1 Canada
T: 1 855 384 5483
F: 1 855 384 8435
1
2
A. Connect the copper ground wire to
ground wire - If you only have two wires
coming from the electrical box, connect
the fixture's copper wire to the green
ground screw on the mounting plate.
B. Connect the white fixture wire to white
supply wire.
C. Connect the black fixture wire to black
supply wire.
iii
A
i
B
ii
C
These instructions are property of DVI Lighting. Do not copy or reproduce.