Télécharger Imprimer la page

Publicité

Liens rapides

ADJUSTABLE LED
VAPOR TIGHT FIXTURE
Models: 65-550, 65-551
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
WARNING: Risk of Fire or Electric Shock
Before beginning installation or service, disconnect the power by turning OFF the circuit
breaker. Turning the power off by using the light switch is not sufficient to prevent electrical
shock. This fixture is for outdoor use and should not be used in areas of limited ventilation
or high ambient temperature. All work should be performed by a qualified electrician.
SUITABLE FOR WET LOCATIONS.
IMPORTANT:
This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation of the product
and the hazards involved. This fixture is rated for 120-277VAC at 50/60Hz.
SPECIFICATIONS
Item #
Watts
Volts
65-550
20W
120 – 277V
65-551
INSTALLATION
STEP 1: Install the desired mounting fitting – recessed box adapter, surface box,
pendant, or wall adapter.
STEP 2: Select the CCT setting (Model 65-550) or the RGB setting (Model 65-551).
See Figure 1.
STEP 3: Install the mounting screws (supplied).
STEP 4: Slip the mounting gasket over the power leads and line up the mounting key slots.
STEP 5: Connect the supply leads to the fixture leads – black to black (hot), white to
white (neutral), green to green or copper (ground).
STEP 6: Tighten the mounting screws.
TROUBLE SHOOTING
If the light does not work, check the power source and check electrical connections.
DIMENSIONS
7 1/16" (180mm)
© Copyright 2021 Satco Products, Inc. 11/21 v1.2
CCT Selectable
3000K/4000K/5000K
Red/Green/Blue
Red: 500lms/Green: 1000lms/Blue: 200lms
Operating
Light Effect
Temperature
1700~2000
-30°C to 50°C
(-22°F to 122°F)
4 3/4" (120mm)
Ø
Ceiling Mount
Wall Mount
Figure 1
M6*40
Allen Screw
Option 1
Option 2
3K
4K
5K
Unscrew the 1/2" NPT lock nut to adjust
the CCT or RGB according to your
requirements. Tighten the 1/2" NPT lock nut.
Connect the cable
Satco Products, Inc.
Brentwood, NY 11717
3K
4K
5K
R
G
B

Publicité

loading

Sommaire des Matières pour Satco Nuvo 65-550

  • Page 1 TROUBLE SHOOTING If the light does not work, check the power source and check electrical connections. Connect the cable DIMENSIONS 7 1/16" (180mm) 4 3/4" (120mm) Ø Satco Products, Inc. © Copyright 2021 Satco Products, Inc. 11/21 v1.2 Brentwood, NY 11717...
  • Page 2 LED AJUSTABLE ACCESORIO ESPAÑOL: HERMÉTICO AL VAPOR INSTRUCCIONES DE INSTALACIÓN Y SEGURIDAD Modelos: 65-550, 65-551 IMPORTANTE: Lea esto antes de instalar el accesorio. Consérvelo para referencia futura. SEGURIDAD: Riesgo de incendio y descarga eléctrica Antes de comenzar con la instalación o el servicio, desconecte la energía eléctrica apagando el disyuntor. Desconectar la energía con el interruptor de la luz no es suficiente para prevenir una descarga eléctrica.

Ce manuel est également adapté pour:

Nuvo 65-551