Télécharger Imprimer la page

Publicité

Liens rapides

PART LIST
LISTE DE PIECES
NO
DESCRIPTION
CHEST /
1
COMMODE
FRONT LEG - RSF/LSF /
2
PIED AVANT
BACK LEG - LSF /
PIED ARRIÈRE -
3
GAUCHE
BACK LEG - RSF /
4
PIED ARRIÈRE -
DROITE
DO NOT TIGHTEN BOLTS UNTIL COMPLETELY ASSEMBLED.
NE PAS SERRER LES BOULONS JUSQU'À CE QUE LE MONTAGE SOIT COMPLETMENT
MADE IN MALAYSIA / FABRIQUÉ EN MALAISIE
ASSEMBLY INSTRUCTION
INSTRUCTIONS D'ASSEMBLAGE
ITEM NO : 1516-9 CHEST / COMMODE
Thank you for purchasing the product. Please take time to read and follow the instruction below.
Check that you have all parts and hardware before assembly. Parts apparently missing are often
found in the packing materials. If you do not have all the parts listed, have your dealer contact us
and they will be sent to you immediately.
Merci d'avoir acheté ce produit. Veuillez lire et suivre les instructions ci-dessous. Vérifiez avant le
montage que vous avez toutes les pièces et fixations. Les pièces qui semblent manquer se trouvent
souvent dans les matériaux d'emballage. Si vous n'avez pas toutes les pièces de la liste, demandez
à votre détaillant et nous vous les enverrons immédiatement.
It is recommended to install protective pads under all legs and supports to avoid damage or scratches
when placing furniture on a wood floor or other hard surcafe, and to limit indentation and prevent
discoloration if placing on carpet.
Il est recommandé de placer des coussins protecteurs sous tous les pieds et toutes les bases des meubles
pour éviterd'endommager ou d'égrantigner les planchers en bois ou autres surfaces dures, et pour
limiter l'empreinte et empêcher la décolorations quand les meubles reposent sur la moquette.
QTY
SKETCH
1 PC
2 PCS
1 PC
1 PC
HARDWARE LIST
LISTE DE QUINCAILLERIE
NO
DESCRIPTION
A
JCBC BOLT / BOULON M6 x 35mm
SPRING WASHER / RONDELLE D'ARRET
B
M6 x 12mm
FLAT WASHER / RONDELLE PLATE
C
M6 x 19mm
D
ALLEN KEY / CLE' ALLEN M4 x 55mm
QTY
SKETCH
4 PCS
4 PCS
4 PCS
1 PC
1 OF/DE 2

Publicité

loading

Sommaire des Matières pour Homelegance 1516-9

  • Page 1 ASSEMBLY INSTRUCTION INSTRUCTIONS D'ASSEMBLAGE ITEM NO : 1516-9 CHEST / COMMODE Thank you for purchasing the product. Please take time to read and follow the instruction below. Check that you have all parts and hardware before assembly. Parts apparently missing are often found in the packing materials.
  • Page 2 ASSEMBLY INSTRUCTION INSTRUCTIONS D'ASSEMBLAGE ITEM NO : 1516-9 CHEST / COMMODE STEP 1 ÉTAPE 1 THE LEG INSIDE BOTTOM DRAWER STEP 2 ÉTAPE 2 NOTE / REMARQUE Tipping restraint hardware kit is included with this product. Refer to installation instruction in the hardware pack.