Scope Of Delivery; Operating Elements - Goobay 51270 Mode D'emploi

EN User Manual
Mains and surge protection switch
1 Safety instructions
The user manual is part of the product and contains important information for correct use.
• Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and passing the product.
• Keep this user manual.
Voltage-free only when the plug is pulled out.
• In case of emergency, after use and during thunderstorms, pull the mains plug direct-
ly out of the socket at the plug housing.
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit connectors and circuits.
A defective device must not be put into operation, but must be secured against unintenti-
onal further use.
• Only use the product, product parts and accessories if they are in perfect condition.
• Avoid extreme loads such as heat and cold, wetness and direct sunlight, microwaves
as well as vibrations and mechanical pressure.
• In case of questions, defects, mechanical damage, malfunctions and other problems
that cannot be solved by the accompanying documentation, contact the dealer or ma-
nufacturer.
• Installation, disassembly, maintenance and repair work may only be carried out by-
qualified electrical specialists.
• Compare technical data of product, power supply and peripheral devices. They must
be identical.
• Use only in dry conditions.
• Do not plug in one after the other.
• Never touch the power plug with wet hands.
• Do not operate covered.
• Do not operate in potentially explosive atmospheres.
Not suitable for children. The product is not a toy!
• Secure packaging, small parts and insulating material against accidental use.
2 Description and function
2.1 Product
This product is an overvoltage protection switch that protects your devices against
mains overvoltages such as against lightning.
○ Operation LED lights up as soon as voltage is applied
2.2

Scope of delivery

Mains and surge protection switch, User Manual
2.3

Operating Elements

1 Protective contact socket
2 Protective contact plug
3 Housing
2.4 Specifications
Article number
1x Protective contact socket (Typ F, CEE 7/3)
Connections
Input voltage
Max. permissible load
Overvoltage protection Uoc 6.0 kV (L-N)/3.0 kV (L-PE)/5.0 kV (N-PE)
Protection class
Protection level
Dimensions (LxWxH)
[mm]
Weight (g)
3 Intended use
We do not permit using the device in other ways like described in chapter
"Description and Function" or in the "Safety Instructions". Use the product only
in dry interior rooms. Not attending to these regulations and safety instructions
might cause fatal accidents, injuries, and damages to persons and property.
4 Preparation
1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used devices and ensure compatibility.
REV2021-07-19
V1.0cl
Subject to change without notice.
4 Overvoltage protection indicator (ope-
ration LED)
51270
1x Safety power plug (Type F, CEE7/4)
250 V 50 Hz
16 A, 3500 W
T3, Uc 255 V , 50 Hz
Up 2.6 kV (L-N) / 2.0 kV (L/N-PE)
I
IP20
77 x 76 x 51
76
5 Connection and operation
1. Connect your household appliances to the surge protector.
2. Connect the surge protection switch to an easily accessible grounded socket.
The overvoltage protection is active when the overvoltage indicator lights up.
This lights up as soon as voltage is present.
6 Maintenance, Care, Storage and Transportation
The product is maintenance-free.
NOTICE! Material damage
• Disconnect the power plug from the socket before each cleaning.
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry and dust-protected ambiece
when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
7 Disposal instructions
7.1 Product
According to the European WEEE directive, electrical and electronic equipment
must not be disposed with consumers waste. Its components must be recycled or
disposed apart from each other. Otherwise contaminative and hazardous
substances can damage the health and pollute the environment.
As a consumer, you are committed by law to dispose electrical and electronic devices to
the producer, the dealer, or public collecting points at the end of the devices lifetime for
free. Particulars are regulated in national right. The symbol on the product, in the user
manual, or at the packaging alludes to these terms. With this kind of waste separation,
application, and waste disposal of used devices you achieve an important share to
environmental protection.
WEEE No: 82898622
7.2 Packaging
Packaging can be disposed of free of charge at the suitable collection points – pa-
per belongs in paper bins, plastics belong in yellow sacks and glass belongs in
used glass bins.
DE4535302615620
8 EU Declaration of conformity
With the CE sign Goobay®, a registered trademark of the Wentronic GmbH
ensures, that the product is conformed to the basic European standards and
directives.
9 Symbols used
For indoor use only
Alternating current
Recycling
Protective earth; protective ground (Class I equipment)
- 2 -
IEC 60417- 5957
IEC 60417- 5032
ISO 7001 - PI PF
066
IEC 60417- 5019
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
51270
Goobay®