Publicité
Les langues disponibles
Les langues disponibles
Attach Shelves to Leg Supports (cont.):
5.
Position the remaining Leg Supports on top of
the Shelves. Figure 3
6.
Insert a Hex Screw through the screw hole for
both the Leg Supports and Shelf, and hand
tighten a Nut and Small Spring Washer onto
each Hex Screw.
7.
Tighten the Nuts onto the Hex Screws using the
supplied Wrench and Allen Key.
8.
Repeat steps 6 and 7 to attach the remaining
Shelves.
9.
Rotate the unit and repeat Steps 6 and 7 to
install the remaining Hex Screws into the unit.
Wheels
Large Spring
Washer
Wrench
Wheels
Attach Wheels:
10.
Attach a Wheel and a Large Spring Washer
to the bottom of the Leg Support. Figure 4
11.
Using the provided wrench, rotate the
Wheel clockwise until tight.
12.
Repeat steps 10 and 11 to attach the
remaining Wheels.
13.
Carefully place bookcase upright. Figure 5
10/16
For parts please visit www.hirshindustries.com. For assembly assistance, please call 1-800-383-7414.
Figure 3
Figure 4
Large Spring
Washer
Leg Supports
Shelves
Figure 5
Page 2 of 2
Publicité
