Installationand Use; Safety Instructions; Gas Connection; Use - Casselin CPASF30G Mode D'emploi

5. INSTALLATION AND USE

5.1 Safety instructions

GAS CONNECTION

The appliances operate on the following gases: Butane G30, Propane G31, Natural gas G20/G25. The
devices are delivered as standard with a Butane/Propane injector corresponding to category II2E+3+.
The connection is made by a 1/2 thread.
WARNING
While operating, the device can reach high temperatures. To avoid burns and accidents, do not use the
device if it is malfunctioning, and do not use non-original spare parts.

5.2 Use

WARNING
The setting up of the device installation and maintenance should only be carried out by professionals.
• Do not leave the appliance running without watching it.
• During use, your hands must be dry.
• Do not move or tilt the device during operation.
INSTALLATION
The installation, adjustment and adaptation to other types of gas as well as commissioning can only be
done by an instructed person, having authorization for this type of operation and only according to the
standards in force.
The appliance must be placed in a well-ventilated space, to guarantee the draft of the combustion gases.
The device needs 2 m3 of air over 1 hour and 1kW of power.
The device can be installed alone or in series with other devices of our manufacture. Maintain a minimum
distance of 10 cm between the device and other objects and avoid contact with flammable materials.
In this case, provide the necessary arrangements to ensure the protection of flammable parts.
SAFETY MEASURES FOR PROTECTION AGAINST FIRE ACCORDING TO EN 06 1008 ARTICLE 21:
- the device can only be used by adults
- the device can be used in an ordinary space according to EN 332000-4-482; 332000-4-42
- the device must be placed or suspended in a stable manner on a non-flammable surface
It is forbidden to place flammable objects on the device or within a distance of less than 10 cm from the
device.
- safety distances for flammable materials according to their degree of flammability and information on the
flammability of building materials – see table
Picture :
Degree of flammability of a construction material (EN 730823)
- A non-flammable: granite, sandstone, concrete, bricks, ceramic tiles, plaster
- B flame retardant: acumin, heraclitus, lihnos, itaver
- C1 badly flammable: hardwood, plywood, hardened paper, umakart
- C2 average flammability: chipboard, solodur, cork, rubber, coatings
- C3 easy flammability: wood fiber boards, polystyrene, polyurethane, PVC
Place the unit upright on a sturdy, flat surface. It is equipped with adjustable feet.
• EN 06 1008 fire protection of local energy consumers and heat emitters
• EN 33 2000 (33 2000-4-482; 33 2000-4-42) the environment for electrical appliances
EN