NGS Technology Roomy Manuel D'utilisation page 5

User's Manual
USB/ SD card operation
• Insert your USB Driver/SD Card into
the unit.
(Please make sure the file in the USB
Driver and SD Card is MP3 format).
• Switch on the unit by "POWER ON/
OFF" button.
• It will automatically detect your USB
Driver and SD Card.
(The music playing indicator will blink).
• If you insert both USB Driver and SD
Card into the unit, please press "U/SD"
button on the remote to select the USB
mode or SD mode to play the MP3 file.
• Tune the "VOLUME" Knob of the unit or
press the "+" or "-" button of the remote
control to adjust the desired volume.
• Press the "BACKWARD" or "FORWARD"
button to select your desired track.
• Press the "PAUSE" button to pause the
playback and press the "PLAY" button to
resume to playback.
• Press the "REPEAT" button on the unit
to select repeat once "ONE" or repeat
all "ALL".
• Press the "EQ" button to switch
between the different equalizer modes.
English
5