All manuals and user guides at all-guides.com
8. Install the propellers
The propeller is installed by default on the aircraft. If you need to
re-install it, please refer to the following instructions. Note that the
propeller must be intact and firmly installed on the aircraft, and the
propeller with the white circle mark must be paired with the motor.
· Install the propeller
(1) Confirm that the aircraft is turned off.
(2) Choose the propeller that matches each motor.
(3) Press down the propeller firmly, and then turn it in the
locked direction to securely install the propeller.
• Disassemble the propeller
(1) Turn off the aircraft.
(2) Press down the propeller firmly, and then turn it in the
unlocking direction to remove the propeller.
Introduction
Lock direction: Rotate in the indicated direction to fix the
propeller.
Unlocking direction: Rotate the propeller as instructed to
loosen it.
Black coded propeller>Pairing>Black coded motor
White coded propeller>Pairing>White coded motor
29