Included Parts - MAXSA 44640-B Instructions D'installation Et De Fonctionnement

Motion-Activated Solar Security Light
Carefully remove and identify all the parts from their protective
them out in front of you.

INCLUDED PARTS

Carefully remove and identify all the parts from their protective packaging and lay them out in
INCLUDED PARTS:
front of you.
Once you have identified all parts, connect the solar
panel to your Solar Security Light by plugging the
15 foot cord into the cord attached to the front of
the solar panel to your Solar Security Light
the Solar Security Light. Turn and twist the cords
by plugging the 15 foot cord into the cord
while pressing firmly together until they are attached
attached to the front of the Solar Security
tightly.
Light. Turn and twist the cords while pressing
Adjustment dials are located on the underside of the motion sensor. Move the motion sensor to
allow for easier access to the controls. Move sensor back into position upon completion.
Adjustment dials are located on the underside of the motion sensor. Move the
motion sensor to allow for easier access to the controls. Move sensor back into
position upon completion.
2
2