Vollrath KDC1418-3-06 Instructions D'assemblage

CAUTION
Sharp Edges and Corners
Handle all parts carefully to prevent personal injury or damage
to the parts. Although edges and corners have been deburred,
they should still be considered sharp.
PART LIST
A B
E
E
H
Item Description
A Phillips Head Screws
B Self-Locking Nuts
C Handles
D Post and Screws (Included with Front Door Panels)
E Side Panels with Doors
F Small Bent Top Panel
G Large Bent Bottom Panel with Rubber Feet
H Front Door Panels
I Trays
All manuals and user guides at all-guides.com
Knock Down Display Case – Three Tray
C D
F
G
I
Qty
17
5
5
6
2
1
1
3
3
Please register your product at Vollrath.com/ProductRegister
©
Assembly Instructions
Item No. KDC1418-3-06
ASSEMBLY
Tools You Will Need
• Medium-size flat head screwdriver.
• Medium-size Phillips head screwdriver.
• A clean cloth to cover the work surface to protect the bakery case.
NOTICE: Do not overtighten screws and hardware.
1. Remove the bakery display case and hardware from packaging.
2. Remove the protective masking from the display case.
3. Lay one side panel flat on a table, with rails facing up, and attach the
large bent panel using three screws.
2017 The Vollrath Company L.L.C. Part No. 2350240-1 ml 3/28/17