Kenwood KDC-BT310U Mode D'emploi page 11

1 Turn the volume knob to select a number (0 to 9) or character ( ,
NUMBER DIAL
+).
2 Press 4 / ¢ to move the entry position.
Repeat steps 1 and 2 until you finish entering the phone number.
3 Press the volume knob to call.
(or using RC-406)
1 Press the number buttons (0 to 9) to enter the phone number.
2 Press
to call.
DVC PRI MAIN-XXX/ SUB-XXX: To view which device is connected as MAIN and
which is connected as SUB.
SETTINGS
PAIRING PHONE SEL Select the phone or audio device to connect or
disconnect.
AUDIO SEL
DVC DELETE 1 Turn the volume knob to select a device to delete,
2 Turn the volume knob to select [YES] or [NO], then
TRANSFER PB (Selectable only when the connected phone supports OPP.)
"DL PB " appears and transfer the phonebook of the connected phone
to this unit manually.
DETAIL SET PIN EDIT Changes the PIN code (up to 8 digits).
1 Turn the volume knob to select a number.
(0000)
2 Press 4 / ¢ to move the entry position.
3 Press the volume knob to confirm.
AUTO ANSWER 1 — 99 (8): The unit answers incoming calls
automatically in the selected time. ; OFF: Cancels.
then press the knob.
press the knob.
Repeat steps 1 and 2 until you finish entering
the PIN code.
# SETTINGS
,
DETAIL SET RECONNECT
AUTO PAIR
BT HF/AUDIO
CALL BEEP
BT UPDATE
MIC GAIN
ECHO LEVEL
Use Voice Recognition
1 Press and hold .
2
Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
BLUETOOTH®
ON: The unit automatically reconnect when the
Bluetooth device is within range. ; OFF: Cancels.
ON: The unit automatically pair supported Bluetooth
device (iPhone/iPod touch) when it is connected
through USB input terminal. Depending on the iOS
version of the connected iPhone/iPod touch, this
function may not work. ; OFF: Cancels.
FRONT: Ouputs audio from the front left and right
speakers. ; ALL: Outputs audio from all the speakers.
ON: The unit beeps when there is an incoming call. ;
OFF: Cancels.
BT F/W XX.XX: YES: Updates all the Bluetooth settings
(including stored pairing, phonebook, and etc.). ;
NO: Cancels.
–20 — +8 (0): The sensitivity of the microphone
increases as the number increased.
1 — 10 (4): Adjust the echo cancellation delay time
until the least echo is being heard during a phone
conversation.
ENGLISH | 11