Nibe DRAZICE NAD Serie Instructions D'installation page 18

1 Inlets for water to storage tank
2 Wells for sensors (thermometer, thermostat)
3 Outlet for storage tank (air outlet)
4 Possibility for mounting TJ 6/4'' el. heating unit
5 Water outlet from storage tank (return water)
6 Water inlet to storage tank (discharge)
7 Other outlet
Heat insulation
internal G 1 ¼"
internal G ½"
external G 1"
internal G 1 ½"
internal G 1 ¼"
external G 1"
internal G 1 ¼"
100 mm (1500 l), 120 mm (2000 l) thick insulation NEODUL LB PP.
The top cover, covers of flanges and hole caps are integral
components. Insulation is supplied in separate packing.
We recommend you use insulation for operation at room
temperature. At temperatures markedly lower than 20°C
the insulation shrinks and cannot be fitted.
- 18 -