Rear Panel Connectors; If You Have A Problem; Warranty Information - ViaSat RM4000 Serie Guide De L'utilisateur

Rear Panel Connectors:

If you have a problem:

1. Make sure you have satellite service. (The RX indicator should be on.)
2. Make sure you have the Ethernet connection. (The LAN indicator should
be on.)
3. Make sure you are transmitting to the satellite. (The TX indicator should
flash when transmitting.)
4. Make sure all of the connections are correct and tight.
5. Try resetting the SM and in-line power supply. (Disconnect the in-line
power supply from the AC power source, wait AT LEAST one minute, and
then reconnect power.) The SM should go through acquisition and
registration process again.
ViaSat, Inc. does not provide a warranty to the end user for this product. Any such warranty from
ViaSat, including the implied warranty of merchantability or fitness for a particular purpose, is
hereby disclaimed.
Your service provider may provide a warranty for this product. For warranty information and
repairs, please contact your service provider.
SurfBeam 2, the SurfBeam 2 logo, ViaSat and the ViaSat logo are trademarks or registered trademarks of ViaSat, Inc. in the U.S. and/
or other countries
The information, specifications, and features contained in this document are subject to change without notice and should not be
construed as a commitment by ViaSat, Inc.
4

WARRANTY INFORMATION

TRADEMARK NOTICE
DOCUMENTATION NOTICE
©Copyright 2011 ViaSat, Inc. All rights reserved.
SurfBeam 2 Satellite Modem User's Guide
®
1108591 Rev. 005