Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Flips and loops
When you have familiarised yourself with the basic flight mano-
euvres and are moving safely in the air, you can then check
out the aerobatic characteristics of the Copter. Manoeuvre the
model at a height of at least 3 m.
Press the aerobatics pushbutton (illustration) and then move
the right-hand control lever. The model performs a loop in the
given direction.
pHoto/VIDeo
Photo
inserting the micro SD card:
Push the micro SD card into the card slot. Function is confirmed
with green LED.
Please ensure that the card clicks into place when pushed in.
If you push the card a second time, it slides back out again.
The model must be switched off when inserting or removing the
card.
taking photographs:
Press the photo button on the transmitter to take an individual
picture (photo).
When a photo is taken a red LED flashes on the underside of the
helicopter.
The photo has been saved to the SD card.
Video recording:
Press the video button on the transmitter to record video clips.
A red LED flashes when the video function is active.
To stop recording, press the video button again on the transmitter.
The green status LED will light up again continuously.
The video has been saved to the SD card.
Reading the SD card:
Switch the camera off and then remove the SD card.
Now you can view and edit the images and video footage on the
computer.
3 Meter
Video
29 // GB
Publicité
Table des Matières
