Bifold VENICE Instructions Pour L'assemblage

Assembly
Instructions
One pair of Bifold Arms
1
Outside View
2
Hardware in this box
80mm Bolts x 8
For the Front & Back Legs
16mm Bolts x 4
For the Stretcher Brackets
3
Fasten Stretcher Brackets to Arm
Leg
Dowel
Hole
Hole for
Bolt
Hole for
cleat
A. Insert the Stretcher Bracket Cleat
into the hole provided.
B. IMPORTANT: Don't fully tighten Bracket until
Stretchers are all in place for easy alignment.
C. Each arm requires two brackets, front and back.
i
Instructions for Bifold Body assembly, are packed in the Body box.
BIFOLD FUTON FRAME
VENICE ARM
Wood Button
Cleat
Stretcher
Bracket
16mm Bolt
Allen Key
Stretcher
Bracket x 4
x 8
4
Assemble the Bifold Body
BODY INSTRUCTIONS: Instructions for assembly of
arms to the Wood Bifold Body are in the BODY box.
NOTE:
Fitting
Wooden
Dowels
Wooden Dowel
5
Fit Wood Button Into Arm Holes
AFTER TOTAL ASSEMBLY:
Push fit or lightly tap
the wooden buttons
into the bolt holes
on the arms.
Preparation of arms
Inside View
Allen Key
Barrel Nuts
x 8
Tap Wooden Dowels all the
way into the middle hole
before assembly to Arms.
See below for
for assembly.
BA-VNC-1016
x 1
Wooden Dowel
x 4
Stretcher
(BODY BOX)
Page 1 of 1