Inspire Cordelia 501-432WT Instructions D'assemblage page 2

FOR YOUR FURNITURE TO LAST, CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY.
PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE.
Before attaching each of the screws,
make sure that the smaller lock
washer is between the larger washer
and the head of the screw.
Some furniture come with optional
height adjustment knobs
underneath each leg. Turn this knob
counterclockwise to raise the leg level
or clockwise to lower the leg level.
IT IS THE USER'S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE SCREWS MAY
LOOSEN OVER TIME AND CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO
SUPPORT ITS INTENDED WEIGHT CAPACITY. THIS CAN LEAD TO COLLAPSE AND CAN
FAILURE TO FOLLOW THE GUIDELINES ABOVE MAY
** IMPORTANT **
MUST READ BEFORE ASSEMBLY!
Position each part correctly and insert
all screws into their respective holes.
Then, hand-tighten only until 70%
tight. Complete tightening with the
tools will come at a later step.
Finally, make sure all parts are
properly aligned then use the included
tools to completely tighten the
screws. Your furniture is now ready
for use.
CAUSE SERIOUS INJURY.
RESULT IN INJURY AND/OR PROPERTY DAMAGE.
Make sure the furniture rests on a
flat and level surface with each leg
evenly touching the ground. Use a
soft blanket or carpet underneath
when turning the piece on its side.
Store the tools for later maintenance.
Tighten the screws again after two
(2) weeks, and then at least once
every six (6) months after that.