EFI Fiery proServer Guide D'installation page 8

Brightness Enables you to adjust the brightness of the Fiery QuickTouch LCD. You can also use this command to
dim the display when it is inactive.
Start the Fiery proServer
After installing the Fiery proServer hardware, and connecting it to the printer and network, you are ready to turn the
Fiery proServer on.
1 Set the power switch on the back of the Fiery proServer to the On (|) position.
2 Power on the Fiery proServer.
Press once and release the button to power on the system. The power supply automatically senses the correct
voltage.
3 At the Admin logon on the monitor, enter the administrator password and click Login.
You can obtain administrator password for Fiery proServer from the label affixed to the rear of the Fiery server.
The administrator password is the serial number printed on the label.
Figure 1: Fiery Server Compliance Label
4 Allow startup to proceed until the Fiery proServer desktop appears on the monitor, and Fiery QuickTouch
displays Idle.
The Fiery proServer takes approximately two minutes to start up. If you are starting Fiery proServer for the first
time, you are required to license the Fiery XF server as part of the installation procedure. For more information,
see Activate the Fiery XF server license
By default, the Windows taskbar is hidden.
The taskbar contains:
•
Fiery Server Control, a separate application for starting and stopping the Fiery XF server, starting Fiery
Command WorkStation, managing licenses, and accessing software updates and media profiles.
•
Fiery System Tools, a tool for changing the language of all Fiery proServer hardware and software
components, and for backing up and restoring the Fiery proServer system.
5 To display the Windows taskbar, do one of the following:
•
To display the taskbar momentarily, move the mouse pointer to the bottom of the screen.
•
To display the taskbar at all times, right-click the taskbar and then click Settings. On the Taskbar tab, set Lock
the taskbar to on, and Automatically hide the taskbar in desktop mode to off.
S/N: XXXXXXXXX
on page 10 .
Installation Guide
Fiery proServer, version 7.2
8