Publicité
Les langues disponibles
Les langues disponibles
Installation - Mounting the Duct Cover
MOUNTING THE DUCT COVER
1. Remove the (2) screws to un-
lock the top support frame from
the bottom support frame. Fig.1.
Adjust the height by referring to
the diagram in Fig. 2. Secure the
support frames together with (2)
screws per extension arm (Tot. 8).
Fig.3
2. Place correct size ducting for your
installation (not supplied) on top
of hood and secure to the blower
collar with aluminum duct tape.
The ducting should be long enou-
gh so it protrudes out the top of
the support frame and extends
into the attic to connect after the
hood is installed. Fig.4
3. Place assembled support frames
on top of hood and secure it to the
hood body using 8 screws. Fig.5
4. Position hole template on the cei-
ling paying attention that the ar-
row is positioned on the same side
as the range hood controls. Fig.6
- 2 -
Publicité
