Product-Specific Safety Instructions - Simons Voss Technologies RouterNode 2 Guide Abrégé

3. Product-specific safety instruc-
tions
Qualifications required
The installation and commissioning requires specialized knowledge.
Only trained personnel may install and commission the product.

Modifications or further technical developments cannot be excluded
and may be implemented without notice.
The German language version is the original instruction manual. Other
languages (drafting in the contract language) are translations of the
original instructions.
Read and follow all installation, installation, and commissioning in-
structions. Pass these instructions and any maintenance instructions to
the user.
3 Product-specific safety instruc-
32 / 176
NOTE
Intended use
SimonsVoss-products are designed exclusively for
opening and closing doors and similar objects.
Do not use SimonsVoss products for any other pur-

poses.
tions
CAUTION
Risk of burns due to hot circuit board
If you power the device with Power-over-Ethernet
(PoE), the board can become very hot.
Allow the unit to cool down before opening the

housing.
RouterNode 2, GatewayNode 2,
SmartBridge
EN