Table des Matières
Publicité
Drawing Title: MCSG-B-159-4000-03
SPÉCIFICATIONS D'INSTALLATION (suite)
INSTALLATION DE LA PLAQUE DE SERRAGE (TYPIQUE)
**CLAMP PLATE INSTALLATION FOR PINS ≤ Ø0.25 [7.0]; PINS > Ø0.25 [7.0] USE HEAD-TO-HEAD INSTALLATION ON SHEET MCSG-B-159-4000-04 & -05.**
B
C
NOTES:
1.
CLAMP PLATE APPLICATIONS REQUIRE GUIDED EJECTION
2.
EJECTOR AND TRANSFER PIN CONCENTRICITY MUST BE WITHIN 0.030" [0.76] OR
10% OF EJECTOR PIN DIA, WHICHEVER IS SMALLER.
3.
ENCLOSED EJECTOR BOX SUGGESTED.
4.
DO NOT SCALE PRINT
5.
BREAK ALL SHARP EDGES, 0.005 [0.03] R MAX
6.
DIMENSIONS IN INCHES [MM], UNLESS NOTED
7.
TOLERANCES UNLESS SPECIFIED:
XXX = 0.003 [0.08]
XX = 0.01 [0.3]
ANGLES = 3 30
Manuel du Produit | Capteur de Bouton de 4 000 Livres à Jauge de Contrainte Multicanaux Lynx™ MCSG‑B‑159‑4000
Multi-Channel Strain Gage 4,000 lb. Sensor (MCSG-B-159-4000) Installation—Clamp Plate Installation
B-Plate or Cavity Insert
Ejector Pin Installed with
Normal Slip-fit Tolerances
H7/g6
Ejector Retainer Plate
Ejector Plate
Ejector Pin Shoulder Ø and Transfer Pin Ø Equal
H7/g6
0.50 MIN [12 MIN]
Fit Must be 1/3 of Pin Length, Else
**Consider Head-to-Head Installation**
Clamp Plate
Cover Plate 32HRC
0.25 MIN [6.0 MIN]
0.02 MIN
0.5 MIN
Per Side
45°
REFER TO
TABLE D
If Pin Ø < 0.12 [3.0], Ø + 0.04 [1.0]
If Pin Ø > 0.12 [3.0], + 0.06 [1.5]
DETAIL B
SCALE 2 : 1
E
0.001 [0.03] E
0.001 [0.03]
0.635
[16.13 0.1]
Standard Fit
Part Thickness < 0.05 [1.5], 1/5 of Thickness
Part Thickness > 0.05 [1.5], 0.01 [0.3]
0.01 MIN
0.3 MIN
Counterbore in Ejector Plate
Transfer Pin Flush with Ejector Plate
Counterbore Ø = Pin Head Ø + 0.04 [1.0] MIN
30° Chamfer Depth Equal to Pin Ø
+
0.005
45° REFER TO
-
0.000
TABLE D
DETAIL C
SCALE 2.5 : 1
TABLE D
Ejector Pin Ø
Chamfer Length
0.04–0.08 [1.0–2.0]
0.01 [0.3]
0.10–0.20 [2.5–5.0]
0.02 [0.4]
0.24–0.40 [6.0–10.0]
0.025 [6.0]
0.010 MIN
0.25 MIN
+
0.002
0.500
-
0.001
[12.7 0.04]
Description: MCSG-B-159-
4000 Sensor Installation
Drawn: K.J.Brettschneider
Design:
Check: M.Groleau
Date: 12.02.2021
RJG, Inc.
11
Publicité
Table des Matières
