Maintenance; Cleaning The Vacuum - Kunzle & Tasin W/D MODULE E Instructions Originales

MAINTENANCE

Always disconnect power cord from power source before operating.
After every use and before sending the appliance to technical assistance, the vacuum cleaner must be
disassembled, cleaned and overhauled to avoid hazard for the maintenance staff.
- Do routine maintenance. Inspect gaskets seals, plastic parts, filters, switches and replace those which have begun to leak or are
damaged.
- Using a machine with a damaged power cord could result in an electrocution. Check the cord looking for cut, cracks or aging signs
and replace it, if it' s necessary.
- Only an authorized service centre can replace power cord of the appliance.
- If extension cord are used, ensure that the cable rating is suitable for use with the equipment. Keep dry at all times.
- Only an authorized service centre can do reparation or maintenance of the appliance. Use only original spare parts.
- Don't let children clean the appliance if they are not under supervision of an adult.

CLEANING THE VACUUM

- To keep the appliance fully functional it is necessary to clean polyester filter shaking it after every use and replace filtering bag if it' s
full.
- Clean every part of the appliance after each use: empty the tank, shake the filters, replace filtering bag if it' s full and clean the
machine with a damp cloth before storing the vacuum cleaner.
WARNING: The floater has the function to stop the vacuuming when the tank is full of liquids or in case of
overturning; carry out cleaning routine checking that there are no damages and change it if it's necessary.
- These warnings are the minimum safety requirement that has to be adopted. Please take note of the safety regulations in your work
place.
- For disposal, the procedure prescribed by local laws must be followed.
W/D Module E - English
13