Installation Procedure; Installing The Software; Connecting The Hardware - Ewent EW3707 Mode D'emploi

2.0 Installation procedure

By following the instructions below you can install the drivers and the additional
software of the EW3707 on your computer. We will also explain how to connect the
EW3707 to your video devices.

2.1 Installing the software

1. Check our website
"EW3707" in the search field and press "Enter".
2. Download and install the driver.
3. Please make sure to first install the driver and then the Arcsoft Showbiz software.
4. Follow the steps shown on screen. During the installation, you need to fill in a
name and licensing number. The licensing number can be found on the quick
installation guide
5. Restart your computer after the installation.
Note! The license number which will be asked during the installation procedure can be
found on the quick installation guide.

2.2 Connecting the hardware

Connect the EW3707 to a USB port on your computer. If you wish you can use the
USB extension cable for more freedom of movement.
Connect the special plug (from which four cables extend) from the audio/video input
cable to the EW3707.
Depending on what device you now wish to connect to the EW3707 (for instance a
camera or video recorder) you can use one of the other four plugs of the audio/video
input cable. See the image below:
www.ewent-online.com for the latest EW3707 drivers. Fill out
3 |
ENGLISH