AFIRE BL40 Manuel D'utilisation page 7

7
8. ERROR AND FUNCTIONNING MESSAGE
Message
E 00 The tank is empty
E 01 The tank is full
E 02 The temperature of the burner (Display side)
Is over 60°C -140° F
E 03 The temperature of the burner (Tank door side)
Is over 60°C -140° F
E 04 Failure of the ignition (Display side)
E 05 Failure of the ignition (Tank door side)
Double burners
E 06 The level of ethanol is too high in the burner during
ignition (Display side)
E 07 Idem E6, (Tank door side)
Double burners
E 08 The trap door of the tank is open
E 09 CO² Sensor detection
E 10 NO
E 11
Temperature of the device is too high (Display side)
E 12
Temperature of the device is too high (Tank door side)
WARNING : Your device works with automatic positive safeties, If an error message appears, you can
restart the device only if the error has been corrected.
.
Anomaly and functions
Fill up the tank
Stop filling
Wait until the temperature decrease
Wait until the temperature decrease
Remove the ethanol from the burner and try again
After 3 attempts contact your retailer
Remove the ethanol from the burner and try again
After 3 attempts contact your retailer
Remove the ethanol from the burner and try again
After 3 attempts contact your retailer
Remove the ethanol from the burner and try again
After 3 attempts contact your retailer
Close the trap door of the tank
Ventilate the room
-
Check that there is no flame inside the safety tray
If yes contact your after sales service
Check that there is no flame inside the safety tray
If yes contact your after sales service
AFIRE 6 London Street, Paddington, W21HR LONDON, UK
Solutions