Laserworld Evolution Serie Mode D'emploi page 8

Manual: Evolution Series ES-100G
Your device runs in DMX mode if '10' is switched off:
7.
Connect a DMX controller to operate the laser.
Use the switches 1 - 9 to set the DMX address of the laser. Each switch represents a num-
ber. To define a number use the preceding number and multiply it by 2:
1 2
Switch
Number 1 2
The laser uses 13 DMX channels, so make sure that the next device uses an address that
doesn't overlap with this range.
Channel
1
2
3
4
5
6
7
8
9
10
11
12
13
Please note that not each pattern can be combined with each effect.
8. To turn off the device switch it off („OFF"), switch the key to „OFF" and disconnect the
power cable from the mains.
page 8 / 24
All manuals and user guides at all-guides.com
3 4 5
4 8 16
Value
0 - 69
70-139
140 - 191
192 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
6 7 8
32 64 128
Function
Laser off
Sound mode
Automatic mode
DMX mode
Patterns / Animations
Strobo
Point speed, Line speed
X-position
Y-position
Size
no function
no function
X-Rotation
Y-Rotation
Z-Rotation
image buildup
9 10
256 Mode Switch