iHome iBT60 Guide Rapide

iBT60
QUICK BLUETOOTH CONNECTION GUIDE
BEFORE YOU START
Your Bluetooth device (cellphone, MP3 player, computer, etc.) must support the A2DP Bluetooth profile
(commonly known as stereo audio profile) to work with the iHome iBT60.
Many of the latest mobile phones and PCs with built-in Bluetooth functionality will support this profile. For
accurate information about your product, please refer to your Bluetooth device's user manual for details on the
Bluetooth profiles it supports and on how to set the device's Bluetooth pairing/searching/setup mode.
ABOUT PAIRING
Pairing is the term used when wirelessly connecting two Bluetooth devices for the first time.
This allows the devices to "see" each other and creates a unique lasting connection between the specific devices.
PAIRING & LINKING YOUR BLUETOOTH DEVICE WITH THE iBT60
1) Make sure your Bluetooth device is fully charged. Turn it on.
2) Turn on Bluetooth functionality on your Bluetooth device. Typically, Bluetooth
controls are found on the device's tools or settings menu (see your user manual).
Turn on Bluetooth connectivity and make your device "discoverable".
3) Slide the Bluetooth/On/Off Switch on the speaker to the Bluetooth position ( ).
The unit will turn on and attempt to auto link to a previously paired device for 10
seconds, indicated by a 3 note tone and the Indicator Light on the unit flashing
blue. If a linked device is found, the indicator will glow solid blue.
4) If no linked device is found, the unit will enter pairing mode, indicated by a 2 note
tone and the Indicator Light on the unit will flash blue and red while the unit
attempts to pair. "iHome iBT60" should appear on your device's menu. If "Not
Paired" or "Not Connected" or similar message appears, tap on the "iHome iBT60"
to begin pairing. If your device asks for a password, enter 1234 on the keyboard
of your device. If no device is paired within 2 minutes, a tone will sound and the
unit will revert to auto link mode. To retry pairing, move the Bluetooth/On/Off
Switch to the OFF position ( ) then move it back to the Bluetooth position ( ).
5) Once paired with a device, the Indicator Light on the unit will glow blue steadily. There should be an indication
on your device that pairing is complete. On some devices, you must then select "Use as Audio Device" or similar
on the device's Bluetooth menu. Once paired, your device should link to the iBT60 whenever within range.
6) Pairing remains intact when the iBT60 and/or the Bluetooth device is powered off or is taken out of link range
(30 feet). The iBT60 supports auto-linking and will automatically re-establish an active connection when your
Bluetooth device returns within range.
7) The next time the iBT60 is powered on it will automatically try to re-establish a link with the most recently
linked Bluetooth device. If your device does not support auto-linking OR was not the last linked to the iBT60,
you must re-link manually by selecting iBT60 from the Bluetooth device's menu on your Bluetooth device.
8) When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as long
as that device is still within range (about 30 feet). So, to pair with a different device you must turn off the
Bluetooth capability of the already paired device.
2
3