Publicité
Les langues disponibles
Les langues disponibles
Before using this tool, please, read attentively these instructions and fol-
low the safety rules when using it. No guarantee is given for damages or
accidents due to non-observance or these instructions and safety norms. Keep these
directions and hand them over together with the tool if and when giving it away.
The rechargeable screwer is not to be used for purposes different from the one
it was made for. This tool is meant for domestic and private use only.
Caution!
• To be used solely under the control and responsibility of an adult.
• The battery is to be charged by adults only!
• Children must not operate electrical devices unsupervised.
• Do not use the charging cable to charge or operate other devices!
• Only use the enclosed charging cable to charge the cordless screwdriver!
USB charger not included.
OPERATING
Charge battery
The integrated lithium-ion battery is already pre-charged on delivery. The battery
reaches full capacity after several charging and discharging processes. Insert the
USB plug of the charging cable (J) into a suitable USB charger (not included) and
the small plug into the charging socket (M). The red indicator (C) shows the correct
connection. The charging time is approx. 5 - 7 hours when the battery is empty. For
optimal performance of the tool, the battery should always be fully charged.
Insert screw bit
Insert the required bit insert (L) into the bit holder (A) of the cordless screwdriver.
Make sure that the bit shape and size match the screw head shape.
Operation
The cordless screwdriver is switched ON/OFF with the appliance switch (B). The
direction of rotation is set by pressing the switch button (E). The display (C) shows
the selected direction of rotation. Select clockwise rotation for screwing in and
anticlockwise rotation for unscrewing.
The light (G) at the front can be switched on and off with the switch (F).
The cordless drill can be rotated 180° by pressing or holding down switch (D) while
turning the handle 180 C°. In this way, the cordless drill can also be used as a
handheld screwdriver.
With the switch (H) you can switch on the LED lamp (I) and use the cordless drill as
a torch.
CLEANING, MAINTENANCE
Use only a dry cloth to clean the appliance. Never dip it in water or use detergents.
The screwer needs no further maintenance, just keep it clean.
DISPOSAL
When the appliance will have to be eliminated, do not throw it in the house-
hold dustbin. It must disposed of at the recycling collector for electric and
electronic instruments.
TECHNICAL DATA
Speed: max. 180 rpm
Torque: max. 3.5 Nm
Lithium-ion battery: 1300 mAH
Publicité
