Ir Romote Operation; Manual Operation - Inakustik eben] Exzellenz HDMI 4x2 3D Mode D'emploi

[Text eingeben]
Output Mode
Output A & Output
Splitter
B Select to a same
Mode
source device
Output A & Output
Matrix B Select to
separate source
Mode
devices
IR remote operation
Two sets of power and selection keys are available for Output A and Output
•
B. The power and selection of Output A and Output B can be controlled
individually.
Output A: Use the power key of Output A on the IR remote controller to
•
turn on the signal transmission of Output A. The power indication LED
(Active-A) of Output A on the front panel will be lighted on. Press the power
key of Output A one more time to turn the Output A to standby. Use number
keys to switch between sources.
Output B: Use the power key of Output B on the IR remote controller to
•
turn on the signal transmission of Output B. The power indication LED
(Active-B) of Output B on the front panel will be lighted on. Press the power
key of Output B one more time to turn the Output B to standby. Use number
keys to switch between sources.
Reset: Use the Reset key on the IR remote controller to reset the Exzellenz
•
HDMI Cross Switch to the initial status.

Manual operation

Output A and Output B have individual source selection and power control key.
•
Output A: The "Select/Power" key is a multi-function key.
•
Power Control: Press the "Select/Power" key for 2 seconds to turn off the power (Standby);
press the "Select/Power" key once to turn on the switcher.
Source Selection: If you want to change the input channel manually, you can press the
"Select/Power" key once. A LED will be lighted up for the channel indication.
Output B: The "Select/Power" key is a multi-function key.
•
Power Control: Press the button for 2 seconds to turn off the power (Standby); press the
"Select/Power" key once to turn on the switcher.
Source Selection: If you want to change the input channel manually, you can press the
"Select/Power" key once. A LED will be lighted up for the channel indication.
Reset: Use the Reset key on the back of the Exzellenz HDMI Cross Switch to reset the Exzellenz
•
HDMI Cross Switch to the initial status.
Source Device Auto Detection & Auto Adjustment
Supported
The source device will auto adjust the
output audio and video signal which can
both be supported by the sink devices of
Output A and Output B. One of the sink
devices will be set as the primary sink
device. (Highest Common Factor
detection mode)
Users can also set the audio/video
output signal by themselves. Please
make sure the setting can be supported
by the sink devices.
The source device will auto adjust the
output audio and video signal that
supported by the sink devices (Output A
or Output B).
Users can also set the audio/video
output signal by themselves. Please
make sure the setting can be supported
by the sink devices.
OPERATION MANUAL
Not Supported
The output audio and video
signal of the source device
needs to be set first.
Please make sure the setting
can be supported by the sink
devices. (For example, if user
set the source to send out a
1080p video signal, but the sink
device can only support up to
720p or 1080i, you will not have
picture the sink device.)
The output audio and video
signal of the source device
needs to be set first.
Please make sure the setting
can be supported by the sink
devices.
11