habitat et jardin Eco 1436 Mode D'emploi page 33

VI. Operation instruction
Picture for keys
SYMBOL
Note:
You may set the desired water temperature from 12 to 40℃.
The center of the screen shows the inlet pool temperature, when the up and down keys are
pressed, the digital flashing displays the set temperature.
After you turn on the heat pump, the fan will start to run in 3 minutes. In another 30 seconds,
the compressor will start to run.
During heating, the
Mode selections
When you turn on the heat pump,
will be light during silence mode.
DESIGNATION
Power ON/OFF
Mode
Up/ Down
will be light.
OPERATION
Press to power on or off the heat pump
1.Heating mode(18~40℃)
2. Press to select Smart/Silence mode
Smart mode:100%-20% capacity
Silence mode:80%-20% capacity
Press to set desired water temperature
will be light as standard mode (Smart mode).
10