User Settings - Updesk PC-03 Manuel D'utilisation

Lock and unlock the desk
- Press «M» and «↑» together for 5 seconds to lock the handset.
- Press «M» and «↓» together for 5 seconds to unlock the handset.
Standing reminder
To activate timer, press «1» and «3» together, the display shows «x.xh».
Then press «↑» or «↓» to adjust the timing.
- When the handset is in sleep mode a flashing dot indicates that the timer is running.
- When the timer has reached the programmed time a buzzer will sound five times
and the handset will wake up from sleep mode.
- Now select the desired height by using «↑» or «↓» button.

User settings

The user can choose to change the desk's default settings. In total there are
6 settings that can be changed. These are numbered in the following order S
1 to S -6.
You can change the settings by pressing «M» for 5 seconds. Then select
which setting you want to change, using «↑» and «↓». Then press «M» again
to select the selected user setting. Select the desired setting and confirm it by
pressing «M».
S1) CM or INCH
1. Press « M» for 5 seconds;
2. Then "S-01" flashes on the display;
3. Press « M» again;
4. Then use «↑» or «↓» to select 1 or 0; (0 = CM & 1 = INCH)
5. To save, press « M» again.
S2) Adjust anti-collision sensor sensitivity
0: means o , 1 : is the least sensitive and 8: is the most sensitive.
S3 & S4) Safety setting, do not adjust before consultation with a professional
S5) Determine the minimum height display (standard 65 cm)
Select the minimum height that will be showed on the display.
S6) Determine automatic or manual operation of memory buttons
0: means manual placement (press and hold the button);
1 : means automatic placement to the selected height.