Table des Matières
Publicité
All manuals and user guides at all-guides.com
Operating Instructions
1. Connect the nozzle onto the spray lance.
2. Connect the water supply hose. Check that the hose has no kinks in it.
3. Connect the spray gun onto the outlet hose.
4. Connect the spray gun onto the main body of the washer.
5. Check gauze filter is clear of any blockage.
6. Add scour for more effective cleaning.
7. Lay down the washer and connect it to the water supply. (Be sure that
there's no leak and the water supply is clear and constant).
8. Plug in the power cord and turn the power switch to "ON".
9. Be sure that the switch on the trigger is opened (lock the switch on
the trigger when not using it, see item 32 on the adjustable spray
nozzle parts diagram). Press the trigger to allow air to be expelled
through the pump and hoses. (Be sure that the spray gun should be
shut down less than 3 minutes when working).
10. Turn on water and check for leaks (see picture 1 & 2).
11. After using, turn off the switch and unplug the power cord.
Picture 1
12
operating instructions
Picture 2
Publicité
Table des Matières
