Sanus VisionMount XF228 Manuel D'instructions page 7

1-4
Attach brackets to aTV with a flat back
1-4
Attach brackets to aTV with an irregular back
M4/M5
[20]
[16, 17]
6901-002115 <01>
[18]
[05, 09, 06, 10]
In step 1-2, If you selected the:
M4 x 20mm [04] or M5 x 20mm bolt [08], use the M4/M5 washer
[18] and spacer [14].
M6 x 25mm diameter bolt [11] use the M6/M8 washer [19] and
spacer [15].
M8 x 25mm diameter bolt [13] use the M6/M8 washer [19] and
spacer [14].
Confirm that the brackets are level on the back of the TV.
If you require additional space for cables, recesses, or protrusions,
choose one of the configurations below.
M4/M5/M6/M8
[14, 15]
In step 1-2, If you selected the:
M4 x 30mm [05] or M5 x 30mm bolt [09]use the M4/M5 washer
[18] and spacer [16].
M4 x 40mm [06] or M5 x 40mm bolt [10], use the M4/M5 washer
[18] and spacer [17].
M6 x 40mm [12] or M8 x 45mm [07] bolt, use the M6/M8 washer
[19] and spacer [17].
Confirm that the brackets are level on the back of the TV.
Standard configurations are shown. For special applications,
or if you are uncertain about your hardware selection, contact
Customer Service.
M6/M8
[20]
[17]
002538.eps
6801-000121 hardwar
[20]
[18, 19]
[04, 08, 11, 13]
[19]
[12, 07]
7